What does it mean when the check engine light comes on?
It means your car's computer found a fault in something it monitors, usually tied to the engine, fuel, ignition, or emissions. The light doesn't tell you which part failed. It tells you something needs a look.
Every time you start the car, the light should come on briefly and then go out once the engine is running. That's the system checking itself. If it stays on while you drive, it has stored a trouble code.
Sometimes the light turns itself off after a few trips. According to the EPA, that usually means the condition that set it went away, not that the system is broken. If it keeps coming back, it's worth finding out why.
Solid or flashing: what's the difference?
A solid light means a problem worth diagnosing soon. A flashing light means a severe problem, such as a misfire, that should be handled right away.
| What you see | What it usually means | What to do |
|---|---|---|
| Brief flash at startup, then off | Normal system self check | Nothing |
| Solid light while driving | The car may not be running properly; it could waste fuel or shorten engine life | Check the gas cap, then schedule a diagnosis soon |
| Flashing light while driving | A severe problem, often an engine misfire | Limit driving, avoid high speeds and heavy loads, and get it checked right away |
This guidance comes from the EPA's consumer fact sheet, What to Do With the Check Engine Light.
What are the most common causes of a check engine light?
The light can point to dozens of faults. These are the usual suspects:
- A loose or missing gas cap. The easiest fix, and the first thing to check.
- An oxygen sensor. It reads the exhaust and helps the engine set its fuel mix.
- The catalytic converter. It cleans the exhaust, and a failing one often sets a code.
- An evaporative emissions (EVAP) leak. A leak in the system that traps fuel vapor.
- A misfire. Often from spark plugs, ignition coils, or wires that aren't firing right.
A code tells us which system flagged the problem. Testing tells us which part actually failed, and those aren't always the same thing.
What should you do when the check engine light comes on?
Stay calm, check the gas cap, and schedule a diagnosis. Here's the order we'd follow:
- Don't panic. The car will usually keep running. Note whether the light is solid or flashing.
- If it's flashing, slow down. Limit driving and avoid high speeds and heavy loads.
- Check the gas cap when you stop. Make sure it isn't loose or missing, and don't refuel with the engine running.
- Notice how the car feels. Rough idle, hesitation, a new smell, or a climbing temperature gauge are worth mentioning.
- Schedule a diagnosis. The sooner it's tested, the more likely it stays a smaller repair.
If the temperature gauge is the light that's on, our post on why your engine temperature warning light is on covers what to do next.
Get the real answer, not just a code.
Our technicians find what set the light and explain it before any repair.
1617 Peninsula Dr, Erie · Complimentary Wi-Fi and refreshments while you wait
Will a check engine light fail your Pennsylvania inspection?
It can. Erie County is in Pennsylvania's Northern emissions region, so many Erie vehicles need an annual emissions inspection on top of the safety inspection. The indicator on your registration card shows whether yours is one of them. Our post on why Erie cars need two inspections explains the details.
Emissions programs that use the federal OBD inspection standard fail a car when the check engine light is commanded on for one or more trouble codes, under 40 CFR 85.2207. PennDOT's Emission Inspections Program page is the authority on Pennsylvania's current rules.
Clearing the code right before the test isn't a shortcut. It wipes the stored information and resets the car's self tests, and the original problem is still there. The better move is to find and fix the cause, then inspect. Since we do state inspections here, you can handle both in one visit.
Is a free code read the same as a diagnostic?
No. A code read tells you which system set the light. A diagnostic finds out why.
A misfire code can come from a plug, a coil, an injector, a vacuum leak, or low compression. Replacing parts based on the code alone is how people end up paying for two or three repairs to fix one problem.
You might be wondering if we'll find a list of extra things to fix.
Here's the truth: we test the system that set the light and explain what we found. If something else needs attention, we'll tell you how urgent it is, and the decision is yours.
You might be wondering if you can keep driving.
Here's the truth: with a solid light and a car that feels normal, you usually can for a short time. With a flashing light, the EPA's advice is to limit driving and get it handled quickly. And if your inspection is coming due, waiting only shortens the window to fix it.
What happens when you bring a check engine light to Harrell?
A check engine light visit at Harrell starts with a conversation and ends with a clear explanation.
- Tell us what you noticed. Solid or flashing, when it came on, and anything the car is doing differently.
- We read the codes and test the system. Our ASE certified technicians trace the fault to its cause.
- We explain what we found. What failed, how urgent it is, and what the repair involves.
- You decide. If you approve the repair, most repairs carry our 3 year / 36,000 mile nationwide warranty.
We work on a long list of makes, from Subaru and Toyota to Audi, BMW, and Jaguar.